SCENARIO STUDY
Review every check ride and simulator scenario in depth
All
✈ Normal Operations
🔥 Engine Failures & Fire
🚨 Emergency Procedures
📡 Instrument Approaches
⚙ System Abnormals
👥 CRM Scenarios
Hydraulic System 2 Failure
🛫 Scenario Setup
En route FL260. Hydraulic System 2 pressure suddenly drops to zero. EDP failure confirmed.
💥 Failure Injection
HYD SYS 2 FAULT on EICAS. System 2 pressure: 0 PSI.
📋 Required Actions (Sequence)
- Acknowledge EICAS warning
- Identify: HYD SYS 2 – confirm with PM
- QRH: Hydraulic System 2 failure checklist
- Assess what is lost: flight controls, landing gear, braking (verify per aircraft)
- Plan for alternate gear extension
- Brief alternate brake system or accumulator braking for landing
- Notify ATC if divert required
- Land at airport with long runway and emergency services
✅ Evaluation Points
- Correct QRH identified and completed
- Alternate gear extension briefed
- Accumulator braking technique understood
- Landing runway selection appropriate (long enough)
❌ Common Errors (UNSAT)
- Not identifying what loads are lost with System 2
- Attempting normal gear extension when system is inoperative
- Not briefing crew on abnormal landing configuration
🎓 What the Instructor / Examiner Watches For
TIMING STANDARDS
- Correct QRH: within 60 seconds of recognition
- ATC notification: when safety allows
AUTOMATIC UNSATISFACTORY
- Operating wrong system off
- No divert decision when required